Pairing your Devices
We have broken setup guides into a number of handy sections below, simply choose the setup which best suits your purchase and follow the instructions along with this helpful video.
Read Our Guide
This handout explains the difference between beeps and flashes when setting up and pairing devices. This is especially useful when pairing a remote and ‘Smart / Wi-Fi’ device to other smoke detectors or heat sensors.
Setup 1: No Remote or Smart
This video explains how to pair a system with no remote or smart device, we explain how to clear and pair your interlinked smoke alarms, heat detectors and (if you wish) carbon monoxide detectors.
Setup 2: With Remote (No Smart)
This video explains how to pair a system with a remote but no smart device, we explain how to clear and pair your interlinked remote, smoke alarms, heat detectors and (if you wish) carbon monoxide detectors.
Setup 3: With Remote and ‘Smart’
This video explains how to pair a system with a remote and Smart Device, we explain how to clear and pair your interlinked remote, smoke alarms, heat detectors, smart device and (if you wish) carbon monoxide detectors.
How to connect to 2.4gHz Wifi
It is important you speak with your Internet Service Provider who will guide you through the process to access the 2.4ghz needed for most smart devices.
1. The video link shown will help you setup the 2.4ghz WiFi, make sure your phone is connected to it. (Device won’t link without it)
2. When the tuya or smart life app tells you to reset the device, ignore this if you’ve followed instructions shown for your setup.
3. Within Tuya / Smart Life select ‘light blinking fast’
4. Press and HOLD the small led side button for 5 flashes.
5. After entering WiFi passwords etc, continue and allow the app to scan, your device will be discovered.